BTX & WX Webinar Recording
Better tension readings.
More confidence in every check.
Thank you for registering for our webinar. Your recording is ready to watch below. When tension readings vary, knowing what to check next matters. Watch this practical BTX and WX session to explore measurement consistency, meter selection, and the factors that affect readings on flat materials.
Your recording is ready. Press play to watch at your own pace.
Resources open in a new tab so you can keep the recording open.
Make your next reading more useful
A number is only useful
when you can trust it.
A different reading can raise a familiar question: did the tension change, or did the measurement? Use this recording to build a more informed approach to your checks, whether you are choosing your first meter or reviewing an existing process.
- Understand what influences a readingReview how material, setup, access, and technique affect tension measurements.
- Build a more consistent routineExplore what makes readings more comparable between operators and repeated checks.
- Make a more informed meter choiceConsider your material, tension range, movement, and calibration needs.
- See where BTX and WX fitExplore measurement approaches for narrow bands and wider web materials.
A smarter starting point.
A useful second look.
Bring your application, your questions, or your current measurement routine. Watch with a clearer purpose for where you are today.
Choose with a clearer picture.
Start with your application, then explore the instrument. Get context for comparing BTX and WX so your next conversation with a tension specialist starts with the right questions.
Get more from the meter you use.
Use the session as a fresh look at your measurement habits. Revisit the fundamentals, consider where your team could improve consistency, and give new operators a shared starting point for discussion and training.
BTX: Narrow, flat materials. Belts, bands, webbing, tape, and similar materials.
WX: Wide, flat materials. Fabric, paper, film, foil, and wider webs.
Not sure which meter fits your application? Explore your options with our flat material meter selector.
Flat Material Meter SelectorMake your next tension check
a more confident one.
Set aside time for a closer look at BTX and WX. Come away with better questions to ask, details to check, and a clearer direction for your application.
Return to the RecordingHave an application in mind? Talk with a Tensitron specialist